Important:

Read More...

]]>

Important:

Please note that not every M3i Zero needs firmware fix!

Please follow the M3i Zero Driver Setup Guide to setup the card first. 

If you get the error message like this :

An error has occured. Press and hold the POWER Button to turn the system off. Please refer to the Nintendo DSi Operations Manual for details.

Please check the firmware version of your DSi or 3DS according to these two steps:

• Click SETTING (with the Tool Icon) on the main menu
• Check the right hand corner of the top screen which says VER 1.x.x

Then choose the correspondent firmware fix guide below to upgrade your M3i Zero to be compatible with your DS console. 

Content List:

1. DS Compatibility
2. Preparation
   • Hardware
   • Software
3. Installation
   1. Format a microSD /SDHC Memory Card
      • Using Windows XP/Vista/7 Format Tool
      • Using Panasonic Memory Card Format Program
      • Using Mac Memory Card Format Tool
   2. Firmware Fix
      • M3i Zero Firmware Fix for 3DS 3.0.0-5 & DSi / DSi XL 1.4.3 Via firmware USB
   3. M3i Zero Driver Setup Guide

DS Compatibility

The following consoles are supported: DS, DS Lite, DSi, DSi XL & 3DS.

For DSi & DSi XL, the supported firmware versions are: 1.1, 1.2, 1.3, 1.4,  1.4.1, 1.4.2 & 1.4.3

For 3DS, the supported firmware versions are: 1.0.0-0, 1.1.0-1, 2.0.0 – 2, 2.1.0-3, 2.2.0-4, 3.0.0-5

Preparation (Checklist Before Installation)

Hardware

1 x DS Lite / DSi/DSi XL/ 3DS
1 x M3i Zero Card (Slot-1)
1 x USB Micro SD memory card reader
1 x USB firmware writer
1 x Micro SD/SDHC Memory Card

Software (Please Click the Driver / Firmware Name for the Latest Download)

[ Back To Top ]

Installation

Please upgrade the M3i Zero firmware first before installing the driver if you want to use the M3i Zero on the DSi with the latest compatible firmware.

• Format a microSD /SDHC Memory Card
  • Using Windows XP/Vista/7 Format Tool
  • Using Panasonic Memory Card Format Program
  • Using Mac Memory Card Format Tool
• Firmware Fix
  • M3i Zero Firmware Fix for 3DS 3.0.0-5 & DSi / DSi XL 1.4.3 Via firmware USB
• M3i Zero Driver Setup Guide

Format a Micro SD/SDHC Card

• Using Windows XP/Vista/7 Format Tool
• Using Panasonic Memory Card Format Program
• Using Mac Memory Card Format Tool

Using Windows XP/Vista/7 Format Tool

After inserting the microSD into the card reader, go to My Computer.
    b)  Right click the driver representing the microSD memory card.
    c)  Choose Format

d)  Click Start to format the memory card in FAT32

[ Back To Top ]

Using Panasonic Memory Card Format Software

Note:
If your memory cards have capacity bigger than 32GB, please download the SD/SDHC/SDXC Memory Cards Format Software.
If your memory cards have capacity equal or smaller than 32GB, please download the SD/SDHC Memory Cards Format Software.

Detailed guide is available from the SD Association here. [http://www.sdcard.org/consumers/formatter/] 

1. Insert SD/SDHC Memory Card into reader/writer.
2. Click on [Start], point to [All Programs] -> [Panasonic] -> [SD Formatter VX.X], and click on [SD Formatter VX.X].
   1. “X.X” means the version number of SD Memory Card Formatting Software.
   2. If “User Account Control” window is displayed on the screen, please click on [Arrow].
3. The main window is displayed on the screen.
4. Select the target drive by drive list and check SD/SDHC Memory Card size.
5. Click on [Format].
6. After clicking on it, confirmation window is displayed on the screen. Here, if [OK] is clicked, this software executes the format operation. On the contrary, if [Cancel] is clicked, this software cancels the format operation and returns to the main window.
7. The following status window is displayed on the screen during the format operation.
   Note: [Cancel] on this window is available only if either “FULL (Erase ON)” or “FULL (Erase OFF)” is selected as format type option. If “QUICK” is selected as format type option, this button is not available.
8. After the format operation completion, click [OK] and remove the Memory Card from your PC.
9. Reinsert the memory card to the PC to start using the memory card.

[ Back To Top ]

Using Mac Memory Card Format Tool

1. Plug your memory card reader into a USB port on your Mac. Insert the microSD / microSDHC card into the memory card reader's microSD / microSDHC slot, and the microSD / microSDHC card will mount on your Mac desktop.
2. In an open Finder window, single-click "Applications" in the Side-Bar and scroll down to find the Utilities folder. Find Disk Utility in the Utilities folder and double-click the "Disk Utility" application to launch it.
3. In the opened Disk Utility application, single-click to select the microSD / microSDHC card in the left-hand Drives column. Then, single-click to select the "Erase" button in the top row of radio buttons. Select the format MS-DOS (FAT) to format the microSD / microSDHC card on the "Volume Format" pop-up button.  When you have finished selecting the formatting options, click "Erase."
4. A new dialogue box will pop up in "Disk Utility," asking if you are sure you wish to erase the microSD / microSDHC card. Caution: Erasing the microSD / microSDHC card will permanently erase any files. Make sure you have backed up any file you wish to keep. To continue with the formatting process, click "Erase."
5. Once the microSD / microSDHC card has been erased, it will mount on your Mac desktop just as any other removable drive.

M3i Zero Firmware Fix for 3DS 3.0.0-5 & DSi / DSi XL 1.4.3 Via Firmware USB

Note:

• All machines are upgradeable even your machine has already been in firmware 3.0.0-5 or 1.4.3. And no need to find another bootable machine to perform the upgrading process. 
• Risk-free: flash card will not be damaged even the upgrading process is not successfully.
   

1. Unzip the firmware ( F_CORE_v3.0.5 ) and driver ( G6&M3DS-R_M74) downloaded (using Winrar) on your PC
   • Winrar can be downloaded from www.download.com by searching for Winrar at the Search.
   • Unzip the files mentioned under the Software Preparation above, you will have one folder and one file as follows.
     

     F_CORE_v3.0.5	G6&M3DS-R_M74
     F_CORE.DAT	SYSTEM

      

2. Select all the two unzipped files and copy them to the root of microSD / SDHC memory card after you have formatted the micro SD / SDHC card in FAT32.

   
    

3. Insert Micro SD/SDHC card into the M3i
    
    
4. Put the upgrade cable into the M3i. The shinny metal contact of the cable, i.e. the side with the ARROW on it, should face the BACK of the M3i.
   
    
5. Plug the USB port into your PC, or anything that has a port that will give it power
    
6. The M3i should blink for about 15~20 seconds. After it stops blinking, your M3i is flashed.
   

    

    

    

    Note:

   LED blinks – in progress
   LED lights off – no power or incomplete
   LED lights on – error (no "f_core.dat" or wrong file etc.)
    

7. If the LED light turns RED (without flashing), it means the update is unsuccessful. Please repeat the whole process from step 1 after you have checked the Possible Reasons For Upgrade Failure listed belowfollowing:
   • Put the upgrade file into sub directory, not the root directory, and the firmware writer can not detect the upgrade file. 
   • USB port can not provide a stable power, please change a stable USB port.
   • There are too many disk defragments in the MicroSD memory card, which needs to be formatted before upgrade. For memory card formatting, please refer to the guide under Format a MicroSD / SDHC card above.

[ Back To Top ]

M3i Zero Driver Setup Guide

1. Unzip the file (G6&M3DS-R_M74)downloaded (using Winrar) on your PC
   1. Winrar can be downloaded from www.download.com by searching for Winrar at the Search.
   2. Unzip the files mentioned under the Software Preparation above, you will have ：
      
       
2. Select all the unzipped files and copy them to the microSD memory card
    

    

    

    

   

    

   

    

3. Copy your own files, including music, movies, pictures and other data to the Micro SD / SDHC memory card.
    
4. Plug in the Micro SD / SDHC to the M3i Zero. Insert the M3i Zero with the microSD into the slot 1 of the DS console. Turn on the DS console.
    
5. For DS & DS Lite, you will see the WARNING – HEALTH AND SAFETY message. Touch the touch screen or press button A to continue.
   
    
6. For DSi or DSi XL, you will see the following icon with the name ALEX RIDER STORMBREAKER THQ. Touch the icon or press button A to continue.
   
    
7. Wait for the M3i Zero to load.
   
    
8. Congratulation if you have come this far as you have successfully set up your M3i Zero. There you go. Enjoy your DS with the multimedia functions.
   

[ Back To Top ]

View full post on R4 3DS & R4i Guides

Read More...

]]>

Important:

Please note that not every M3i Zero needs firmware fix!

Please follow the M3i Zero Driver Setup Guide to setup the card first. 

If you get the error message like this :

An error has occured. Press and hold the POWER Button to turn the system off. Please refer to the Nintendo DSi Operations Manual for details.

Please check the firmware version of your DSi or 3DS according to these two steps:

• Click SETTING (with the Tool Icon) on the main menu
• Check the right hand corner of the top screen which says VER 1.x.x

Then choose the correspondent firmware fix guide below to upgrade your M3i Zero to be compatible with your DS console. 

Content List:

1. DS Compatibility
2. Preparation
   • Hardware
   • Software
3. Installation
   1. Format a microSD /SDHC Memory Card
      • Using Windows XP/Vista/7 Format Tool
      • Using Panasonic Memory Card Format Program
      • Using Mac Memory Card Format Tool
   2. Firmware Fix
      • M3i Zero Firmware Fix for 3DS 3.0.0-5 & DSi / DSi XL 1.4.3 Via firmware USB
   3. M3i Zero Driver Setup Guide

DS Compatibility

The following consoles are supported: DS, DS Lite, DSi, DSi XL & 3DS.

For DSi & DSi XL, the supported firmware versions are: 1.1, 1.2, 1.3, 1.4,  1.4.1, 1.4.2 & 1.4.3

For 3DS, the supported firmware versions are: 1.0.0-0, 1.1.0-1, 2.0.0 – 2, 2.1.0-3, 2.2.0-4, 3.0.0-5

Preparation (Checklist Before Installation)

Hardware

1 x DS Lite / DSi/DSi XL/ 3DS
1 x M3i Zero Card (Slot-1)
1 x USB Micro SD memory card reader
1 x USB firmware writer
1 x Micro SD/SDHC Memory Card

Software (Please Click the Driver / Firmware Name for the Latest Download)

[ Back To Top ]

Installation

Please upgrade the M3i Zero firmware first before installing the driver if you want to use the M3i Zero on the DSi with the latest compatible firmware.

• Format a microSD /SDHC Memory Card
  • Using Windows XP/Vista/7 Format Tool
  • Using Panasonic Memory Card Format Program
  • Using Mac Memory Card Format Tool
• Firmware Fix
  • M3i Zero Firmware Fix for 3DS 3.0.0-5 & DSi / DSi XL 1.4.3 Via firmware USB
• M3i Zero Driver Setup Guide

Format a Micro SD/SDHC Card

• Using Windows XP/Vista/7 Format Tool
• Using Panasonic Memory Card Format Program
• Using Mac Memory Card Format Tool

Using Windows XP/Vista/7 Format Tool

After inserting the microSD into the card reader, go to My Computer.
    b)  Right click the driver representing the microSD memory card.
    c)  Choose Format

d)  Click Start to format the memory card in FAT32

[ Back To Top ]

Using Panasonic Memory Card Format Software

Note:
If your memory cards have capacity bigger than 32GB, please download the SD/SDHC/SDXC Memory Cards Format Software.
If your memory cards have capacity equal or smaller than 32GB, please download the SD/SDHC Memory Cards Format Software.

Detailed guide is available from the SD Association here. [http://www.sdcard.org/consumers/formatter/] 

1. Insert SD/SDHC Memory Card into reader/writer.
2. Click on [Start], point to [All Programs] -> [Panasonic] -> [SD Formatter VX.X], and click on [SD Formatter VX.X].
   1. “X.X” means the version number of SD Memory Card Formatting Software.
   2. If “User Account Control” window is displayed on the screen, please click on [Arrow].
3. The main window is displayed on the screen.
4. Select the target drive by drive list and check SD/SDHC Memory Card size.
5. Click on [Format].
6. After clicking on it, confirmation window is displayed on the screen. Here, if [OK] is clicked, this software executes the format operation. On the contrary, if [Cancel] is clicked, this software cancels the format operation and returns to the main window.
7. The following status window is displayed on the screen during the format operation.
   Note: [Cancel] on this window is available only if either “FULL (Erase ON)” or “FULL (Erase OFF)” is selected as format type option. If “QUICK” is selected as format type option, this button is not available.
8. After the format operation completion, click [OK] and remove the Memory Card from your PC.
9. Reinsert the memory card to the PC to start using the memory card.

[ Back To Top ]

Using Mac Memory Card Format Tool

1. Plug your memory card reader into a USB port on your Mac. Insert the microSD / microSDHC card into the memory card reader's microSD / microSDHC slot, and the microSD / microSDHC card will mount on your Mac desktop.
2. In an open Finder window, single-click "Applications" in the Side-Bar and scroll down to find the Utilities folder. Find Disk Utility in the Utilities folder and double-click the "Disk Utility" application to launch it.
3. In the opened Disk Utility application, single-click to select the microSD / microSDHC card in the left-hand Drives column. Then, single-click to select the "Erase" button in the top row of radio buttons. Select the format MS-DOS (FAT) to format the microSD / microSDHC card on the "Volume Format" pop-up button.  When you have finished selecting the formatting options, click "Erase."
4. A new dialogue box will pop up in "Disk Utility," asking if you are sure you wish to erase the microSD / microSDHC card. Caution: Erasing the microSD / microSDHC card will permanently erase any files. Make sure you have backed up any file you wish to keep. To continue with the formatting process, click "Erase."
5. Once the microSD / microSDHC card has been erased, it will mount on your Mac desktop just as any other removable drive.

M3i Zero Firmware Fix for 3DS 3.0.0-5 & DSi / DSi XL 1.4.3 Via Firmware USB

Note:

• All machines are upgradeable even your machine has already been in firmware 3.0.0-5 or 1.4.3. And no need to find another bootable machine to perform the upgrading process. 
• Risk-free: flash card will not be damaged even the upgrading process is not successfully.
   

1. Unzip the firmware ( F_CORE_v3.0.5 ) and driver ( G6&M3DS-R_M74) downloaded (using Winrar) on your PC
   • Winrar can be downloaded from www.download.com by searching for Winrar at the Search.
   • Unzip the files mentioned under the Software Preparation above, you will have one folder and one file as follows.
     

     F_CORE_v3.0.5	G6&M3DS-R_M74
     F_CORE.DAT	SYSTEM

      

2. Select all the two unzipped files and copy them to the root of microSD / SDHC memory card after you have formatted the micro SD / SDHC card in FAT32.

   
    

3. Insert Micro SD/SDHC card into the M3i
    
    
4. Put the upgrade cable into the M3i. The shinny metal contact of the cable, i.e. the side with the ARROW on it, should face the BACK of the M3i.
   
    
5. Plug the USB port into your PC, or anything that has a port that will give it power
    
6. The M3i should blink for about 15~20 seconds. After it stops blinking, your M3i is flashed.
   

    Note:

   LED blinks – in progress
   LED lights off – no power or incomplete
   LED lights on – error (no "f_core.dat" or wrong file etc.)
    

7. If the LED light turns RED (without flashing), it means the update is unsuccessful. Please repeat the whole process from step 1 after you have checked the Possible Reasons For Upgrade Failure listed belowfollowing:
   • Put the upgrade file into sub directory, not the root directory, and the firmware writer can not detect the upgrade file. 
   • USB port can not provide a stable power, please change a stable USB port.
   • There are too many disk defragments in the MicroSD memory card, which needs to be formatted before upgrade. For memory card formatting, please refer to the guide under Format a MicroSD / SDHC card above.

[ Back To Top ]

M3i Zero Driver Setup Guide

1. Unzip the file (G6&M3DS-R_M74)downloaded (using Winrar) on your PC
   1. Winrar can be downloaded from www.download.com by searching for Winrar at the Search.
   2. Unzip the files mentioned under the Software Preparation above, you will have ：
      
       
2. Select all the unzipped files and copy them to the microSD memory card
    

   

    

   

    

3. Copy your own files, including music, movies, pictures and other data to the Micro SD / SDHC memory card.
    
4. Plug in the Micro SD / SDHC to the M3i Zero. Insert the M3i Zero with the microSD into the slot 1 of the DS console. Turn on the DS console.
    
5. For DS & DS Lite, you will see the WARNING – HEALTH AND SAFETY message. Touch the touch screen or press button A to continue.
   
    
6. For DSi or DSi XL, you will see the following icon with the name ALEX RIDER STORMBREAKER THQ. Touch the icon or press button A to continue.
   
    
7. Wait for the M3i Zero to load.
   
    
8. Congratulation if you have come this far as you have successfully set up your M3i Zero. There you go. Enjoy your DS with the multimedia functions.
   

[ Back To Top ]

View full post on R4 3DS & R4i Guides

Important:

Read More...

Important:

If you encounter the following error message, it means that you need to update the firmware on your Acekard 2i 3DS:

Read More...

]]>

Important:

If you encounter the following error message, it means that you need to update the firmware on your Acekard 2i 3DS:

An error has occured. Press and hold the POWER Button to turn the system off. Please refer to the Nintendo DSi Operations Manual for details. 

Following this guide to carry out the firmware fix: Acekard 2i Firmware Fix for 3DS 3.0.0-5 & DSi / DSi XL 1.4.3

Otherwise, please proceed to Acekard 2i Driver Setup Guide

 

Content List:

1. DS Compatibility
2. Preparation
   • Hardware
   • Software
3. Installation

a. Format a microSD /SDHC Memory Card (using one of the following method)

1. Using Windows XP/Vista/7 Format Tool
2. Using Panasonic Memory Card Format Program
3. Using Mac Memory Card Format Tool

b. Firmware Fix

1. Acekard 2i Firmware Fix for 3DS 3.0.0-5 & DSi / DSi XL 1.4.3

c. Acekard 2i Driver Setup Guide

DS Compatibility

The following consoles are supported: DS, DS Lite, DSi, DSi XL & 3DS.

For DSi & DSi XL, the supported firmware versions are: 1.1, 1.2, 1.3, 1.4, 1.4.1,1.4.2 & 1.4.3.

For 3DS, the supported firmware version are : 1.1.0-1, 2.0.0-2, 2.1.0-3, 2.1.0-4, 2.2.0-4, 3.0.0-5

Preparation (Checklist Before Installation)

Hardware

1 x DS / DS Lite / DSi / DSi XL / 3DS

• A 3DS console with firmware lower than 3.0.0-5 (3.0.0-5E, 3.0.0-5J, 3.0.0-5U & 3.0.0-5A)
• A DSi console with firmware lower than 1.4.3 (1.4.3E, 1.4.3J, 1.4.3U & 1.4.3A)
• If you don’t have a DSi with firmware lower than 1.4.3, you have to use a DS Lite console.

1 x Acekard 2i Card
1 x USB Reader
1 x Micro SD/SDHC Memory Card

 

Software (Please Click the Driver / Firmware Name for the Latest Download)

Firmware Fix For 3DS v2.1.0-3x & DSi v1.4.3x	ak2ifw_update_3ds3.0_DSi143
Driver / Kernel	AKAIO.1.8.9
Official Website	www.acekard.com

 

[ Back To Top ]

 

Format a Micro SD/SDHC Card

• Using Windows XP/Vista/7 Format Tool
• Using Panasonic Memory Card Format Program
• Using Mac Memory Card Format Tool

Using Windows XP/Vista/7 Format Tool

After inserting the Micro SD/SDHC into the card reader, go to My Computer.
    b)  Right click the driver representing the Micro SD/SDHC memory card.
    c)  Choose Format

 

d)  Click Start to format the memory card in FAT32

 

[ Back To Top ]

 

Using Panasonic Memory Card Format Software

Note:
If your memory cards have capacity bigger than 32GB, please download the SD/SDHC/SDXC Memory Cards Format Software.
If your memory cards have capacity equal or smaller than 32GB, please download the SD/SDHC Memory Cards Format Software.

Detailed guide is available from the SD Association here. [http://www.sdcard.org/consumers/formatter/] 

1. Insert SD/SDHC Memory Card into reader/writer.
2. Click on [Start], point to [All Programs] -> [Panasonic] -> [SD Formatter VX.X], and click on [SD Formatter VX.X].
   * “X.X” means the version number of SD Memory Card Formatting Software. 
   * If “User Account Control” window is displayed on the screen, please click on [Arrow].
3. The main window is displayed on the screen.
4. Select the target drive by drive list and check SD/SDHC Memory Card size.
5. Click on [Format].
6. After clicking on it, confirmation window is displayed on the screen. Here, if [OK] is clicked, this software executes the format operation. On the contrary, if [Cancel] is clicked, this software cancels the format operation and returns to the main window.
7. The following status window is displayed on the screen during the format operation.
   Note: [Cancel] on this window is available only if either “FULL (Erase ON)” or “FULL (Erase OFF)” is selected as format type option. If “QUICK” is selected as format type option, this button is not available.
8. After the format operation completion, click [OK] and remove the Memory Card from your PC.
9. Reinsert the memory card to the PC to start using the memory card.

 

[ Back To Top ]

 

Using Mac Memory Card Format Tool

1. Plug your memory card reader into a USB port on your Mac. Insert the Micro SD / MicroSDHC card into the memory card reader's MicroSD / MicroSDHC slot, and the MicroSD / MicroSDHC card will mount on your Mac desktop.
2. In an open Finder window, single-click "Applications" in the Side-Bar and scroll down to find the Utilities folder. Find Disk Utility in the Utilities folder and double-click the "Disk Utility" application to launch it.
3. In the opened Disk Utility application, single-click to select the MicroSD / MicroSDHC card in the left-hand Drives column. Then, single-click to select the "Erase" button in the top row of radio buttons. Select the format MS-DOS (FAT) to format the MicroSD / MicroSDHC card on the "Volume Format" pop-up button.  When you have finished selecting the formatting options, click "Erase."
4. A new dialogue box will pop up in "Disk Utility," asking if you are sure you wish to erase the MicroSD / MicroSDHC card. Caution: Erasing the MicroSD / MicroSDHC card will permanently erase any files. Make sure you have backed up any file you wish to keep. To continue with the formatting process, click "Erase."
5. Once the MicroSD / MicroSDHC card has been erased, it will mount on your Mac desktop just as any other removable drive.

 

[ Back To Top ]

 

Acekard 2i Firmware Fix For 3DS v3.0.0-5 & DSi / DSi XL v1.4.3

 

Kind reminder: 

When upgrading the Acekard 2i 3DS card, it is not allowed to turn off power or pull out the card; otherwise the card will be damaged.
Prepare a DS Lite. If you do not have a DS Lite, try to get hold of another DSi or 3DS which does not block your Acekard 2i 3DS card.

Follow the steps below to carry out the update:

1. Plug your DS console to the wall to make sure that the DS console power supply will not be interrupted during the firmware upgrade process.

2. Download the official driver (AKAIO.1.8.9 ) and firmware (ak2ifw_update_3ds3.0_DSi 143).

3. Unzip the files downloaded (using Winrar) on your PC.

• Winrar can be downloaded from www.download.com by searching for Winrar at the Search.
• Unzip the files mentioned under the Software Preparation above, you will get:

AKAIO.1.8.9	ak2ifw_update_3ds3.0_DSi 143
__aio akmenu4.nds LoaderChangelog.txt readme_AKAIO.txt readme_before_update.txt	ak2ifw_update_3ds30_DSi143_onDSi_and_DSXL_and3DS.nds ak2ifw_update_3ds30_DSi143_onDSL.nds readme.txt

• For DSi (XL) : ak2ifw_update_3ds30_DSi143_onDSi_and_DSXL_and3DS.nds
• For DS Lite   : ak2ifw_update_3ds30_DSi143_onDSL.nds

4. Simply drag the eight unzipped files onto the root of the micro SD / SDHC card after you have format the SD / SDHC card.

5.Plug in the Micro SD/SDHC to the Acekard 2i and insert the Acekard 2i to the DS Lite console.

6. Select the Micro SD/SDHC Card icon on the main operating system

7. Press button A to select the firmware file.

• For DSi (XL) : ak2ifw_update_3ds30_DSi143_onDSi_and_DSXL_and3DS.nds
• For DS Lite   : ak2ifw_update_3ds30_DSi143_onDSL.nds

8. When you see the following, please follow the instruction to eject the card and insert it again. Then press B to continue.

9. You will be prompted if you want to update the firmware as follows:

10. Press Start button on the DS to continue.

11. The following screen shows that the update is 55% done.

12. The following screen shows that the update has been completed. Congratulation! Restart your DS now.

13. The Acekard icon on the main menu has been changed to the following icon. The icon means you have upgraded the Acekard 2i firmware successfully.

 

[ Back To Top ]

 

Acekard 2i Driver Setup Guide

1. Unzip the file downloaded (using Winrar) on your PC
   1. Winrar can be downloaded from www.download.com by searching for Winrar at the Search.
   2. Unzip the files mentioned under the Software Preparation above, you will get:
      

      AKAIO.1.8.9

      __aio akmenu4.nds LoaderChangelog.txt readme_AKAIO.txt readme_before_update.txt

2. Now copy the all the above four files to the root folder of the Micro SD/SDHC memory card.
    
3. Copy your own files, including music, movies, pictures and other data to the Micro SD/SDHC memory card.
    
4. Plug in the Micro SD/SDHC to the Acekard 2i. Insert the Acekard 2i with the microSD into the slot 1 of the DS console. Turn on the DS console.
    
5. You will see the WARNING – HEALTH AND SAFETY message. Please touch the touch screen or press button A to continue.
   
    
6. For DSi or DSi XL, you will the following icon with words ALEX RIDER STORMBREAKER THQ. Please touch the icon or press button A to continue.
   
    
7. Wait for the Acekard 2i to load.
   
    
8. You will see the Acekard 2i main menu. Touch the microSD Card icon or Press button A to continue.
   
    
9. Congratulation if you have come this far as you have successfully set up your iPlayer. There you go. Enjoy your DS with the multimedia functions.

 

[ Back To Top ]

 

View full post on R4 3DS & R4i Guides

]]> http://www.nintendodscard.com/nintendo-3ds/acekard-2i-3ds-setup-guide-for-3ds-3-0-0-5-dsi-1-4-3/feed/ 0 http://www.nintendodscard.com/r4-sdhc/r4i-3ds-setup-guide-for-3ds-3-0-0-5-dsi-1-4-3/ http://www.nintendodscard.com/r4-sdhc/r4i-3ds-setup-guide-for-3ds-3-0-0-5-dsi-1-4-3/#comments Fri, 09 Dec 2011 09:15:11 +0000 admin http://www.nintendodscard.com/r4-sdhc/r4i-3ds-setup-guide-for-3ds-3-0-0-5-dsi-1-4-3/

 

Important:

If you encounter the following error message, it means that you need to update the firmware on your R4i SDHC 3DS:

An error has occured. Press and hold the POWER Button to turn the system off. Please refer to the Nintendo DSi Operations Manual for details. 

Following this guide to carry out the firmware fix: Read More...

]]>

 

Important:

If you encounter the following error message, it means that you need to update the firmware on your R4i SDHC 3DS:

An error has occured. Press and hold the POWER Button to turn the system off. Please refer to the Nintendo DSi Operations Manual for details. 

Following this guide to carry out the firmware fix: Firmware Fix for 3DS 3.0.0-5 & DSi 1.4.3

Otherwise, please proceed to R4i SDHC 3DS Driver Setup

Content List:

1. DS Compatibility
2. Preparation
   • Hardware
   • Software
3. Installation

a. Format a microSD /SDHC Memory Card (using one of the following method)

• Using Windows XP/Vista/7 Format Tool
• Using Panasonic Memory Card Format Program
• Using Mac Memory Card Format Tool

b. Firmware Fix

• Firmware Fix for 3DS 3.0.0-5 & DSi 1.4.3

c. R4i SDHC 3DS Driver Setup

 

DS Compatibility

The following consoles are supported: DS, DS Lite, DSi, DSi XL & 3DS.

For DSi & DSi XL, the supported firmware versions are: 1.1, 1.2, 1.3, 1.4, 1.4.1, 1.4.2, 1.4.3

For 3DS, the supported firmware versions are: 1.0.0-1,  2.0.0-2, 2.1.0-3, 2.1.0-4, 2.2.0-4, 3.0.0-5

Preparation (Checklist Before Installation)

Hardware

1 x DS Lite/DSi (XL)
1 x R4i SDHC 3DS Card (Slot-1)
1 x USB Reader
1 x Micro SD/SDHC Memory Card

Software (Please Click the Driver / Firmware Name for the Latest Download)

Driver / Kernel	R4i-3DS V1.49b English
Official Website	www.r4i-sdhc.com

 

[ Back To Top ]

 

Format a Micro SD/SDHC Card

• Using Windows XP/Vista/7 Format Tool
• Using Panasonic Memory Card Format Program
• Using Mac Memory Card Format Tool

Using Windows XP/Vista/7 Format Tool

After inserting the microSD into the card reader, go to My Computer.
b)  Right click the driver representing the microSD memory card.
c)  Choose Format

 

d)  Click Start to format the memory card in FAT32

 

[ Back To Top ]

 

Using Panasonic Memory Card Format Software

Note:
If your memory cards have capacity bigger than 32GB, please download the SD/SDHC/SDXC Memory Cards Format Software.
If your memory cards have capacity equal or smaller than 32GB, please download the SD/SDHC Memory Cards Format Software.

Detailed guide is available from the SD Association here. [http://www.sdcard.org/consumers/formatter/]

1. Insert SD/SDHC Memory Card into reader/writer.
2. Click on [Start], point to [All Programs] -> [Panasonic] -> [SD Formatter VX.X], and click on [SD Formatter VX.X].
   “X.X” means the version number of SD Memory Card Formatting Software.
   If “User Account Control” window is displayed on the screen, please click on [Arrow].
3. The main window is displayed on the screen.
4. Select the target drive by drive list and check SD/SDHC Memory Card size.
5. Click on [Format].
6. After clicking on it, confirmation window is displayed on the screen. Here, if [OK] is clicked, this software executes the format operation. On the contrary, if [Cancel] is clicked, this software cancels the format operation and returns to the main window.
7. The following status window is displayed on the screen during the format operation.
   Note: [Cancel] on this window is available only if either “FULL (Erase ON)” or “FULL (Erase OFF)” is selected as format type option. If “QUICK” is selected as format type option, this button is not available.
8. After the format operation completion, click [OK] and remove the Memory Card from your PC.
9. Reinsert the memory card to the PC to start using the memory card.

[ Back To Top ]

Using Mac Memory Card Format Tool

1. Plug your memory card reader into a USB port on your Mac. Insert the microSD / microSDHC card into the memory card reader's microSD / microSDHC slot, and the microSD / microSDHC card will mount on your Mac desktop.
2. In an open Finder window, single-click "Applications" in the Side-Bar and scroll down to find the Utilities folder. Find Disk Utility in the Utilities folder and double-click the "Disk Utility" application to launch it.
3. In the opened Disk Utility application, single-click to select the microSD / microSDHC card in the left-hand Drives column. Then, single-click to select the "Erase" button in the top row of radio buttons. Select the format MS-DOS (FAT) to format the microSD / microSDHC card on the "Volume Format" pop-up button.  When you have finished selecting the formatting options, click "Erase."
4. A new dialogue box will pop up in "Disk Utility," asking if you are sure you wish to erase the microSD / microSDHC card. Caution: Erasing the microSD / microSDHC card will permanently erase any files. Make sure you have backed up any file you wish to keep. To continue with the formatting process, click "Erase."
5. Once the microSD / microSDHC card has been erased, it will mount on your Mac desktop just as any other removable drive.

[ Back To Top ]

Firmware Fixed for 3DS 3.0.0-5 & DSi 1.4.3

Kind reminder: 

When upgrading the r4i-sdhc card, it is not allowed to turn off power or pull out the card; otherwise the card will be damaged.

Please follow the simple steps below to carry out the update:

 

1. Format your micro sd card in FAT32 before the upgrade.

 

2. Download the latest kernel R4i-3DS V1.49b English.

 

3. Unzip the kernel and copy the four files (moonmemo, moonshl2, R4iMenu, R4.dat) to the root of MicroSD / SDHC card.

 

4. Insert MicroSD / SDHC card into R4i-SDHC 3DS card, insert R4i-SDHC 3DS card into Nintendo console 

 

Please take note that the upgrade needs to be done on one of the following consoles:

• 3DS with firmware version lower than 3.0.0-5E
• DSi / DSi XL with firmware version lower than 1.4.3E
• DS Lite / DS 

5. Turn on your console; you will see the following icon below. Touch “START” to continue.

 

6. Please follow the steps below to upgrade your R4i SDHC 3DS card.

a. Choose “Config”

 

b. Select “Upgrade”

 

c. Click “Start” to continue the upgrading

 

d. Wait a few minutes to complete the upgrading. And please do not turn off the power during the upgrade. Otherwise, it will brick your R4i SDHC 3DS card. 

 

e. When the upgrade is successful, please restart your console.

 

f. Once the icon below show up, it means that the R4i SDHC 3DS card is able to work on 3DS 3.0.0-5

[ Back To Top ]

 

R4i SDHC 3DS Card Setup Guide

1. Unzip the file downloaded aforementioned (using Winrar) on your PC
   1. Winrar can be downloaded from www.download.com by searching for Winrar at the Search.
   2. Unzip the files mentioned under the Software Preparation above, you will have ：
      

      R4i-3DS V1.49b English

      moonmemo moonshl2 R4iMenu R4.dat

       

2. Select all the above four unzipped files and copy them to the microSD memory card
    
3. Copy your own files, including music, movies, pictures and other data to the Micro SD/SDHC memory card.
    
4. Plug in the Micro SD/SDHC to the R4i SDHC. Insert the R4i SDHC with the microSD into the slot 1 of the DS console. Turn on the DS console.
    
5. You will see the WARNING – HEALTH AND SAFETY message.  Touch the touch screen or press button A to continue.
   
    
6. For DSi or DSi XL, you will see the following icon with the name Disney/Pixar Finding Nemo Escape to the Big Blue THQ.  Please touch the icon or press button A to continue.
    
    
7. Wait for the R4i SDHC 3DS to load.
   
    
8. Congratulation if you have come this far as you have successfully set up your R4i SDHC 3DS. There you go. Enjoy your DS with the multimedia functions.
   
    
9. If the screen is stuck with the ‘Loading’ message, it is due to the wrong driver being used. Please check the Software Preparation at the top of this guide and re-do the software download & installation.

 

[ Back To Top ]

View full post on R4 3DS & R4i Guides

]]> http://www.nintendodscard.com/r4-sdhc/r4i-3ds-setup-guide-for-3ds-3-0-0-5-dsi-1-4-3/feed/ 0 http://www.nintendodscard.com/r4-sdhc/acekard-2i-3ds-setup-guide-for-3ds-2-1-0-4-dsi-1-4-3/ http://www.nintendodscard.com/r4-sdhc/acekard-2i-3ds-setup-guide-for-3ds-2-1-0-4-dsi-1-4-3/#comments Fri, 28 Oct 2011 08:25:33 +0000 admin http://www.nintendodscard.com/r4-sdhc/acekard-2i-3ds-setup-guide-for-3ds-2-1-0-4-dsi-1-4-3/

Important:

If you encounter the following error message, it means that you need to update the firmware on your R4i SDHC 3DS:

Read More...

]]>

Important:

If you encounter the following error message, it means that you need to update the firmware on your R4i SDHC 3DS:

An error has occured. Press and hold the POWER Button to turn the system off. Please refer to the Nintendo DSi Operations Manual for details. 

Following this guide to carry out the firmware fix: Acekard 2i Firmware Fix for N3DS v2.1.0-4x & DSi v1.4.3x 

Otherwise, please proceed to Acekard 2i Driver Setup Guide

 

Content List:

1. DS Compatibility
2. Preparation
   • Hardware
   • Software
3. Installation

1. • Format a microSD /SDHC Memory Card (using one of the following method)
     • Using Windows XP/Vista/7 Format Tool
     • Using Panasonic Memory Card Format Program
     • Using Mac Memory Card Format Tool
   • Firmware Fix
     • Acekard 2i Firmware Fix for N3DS v2.1.0-4x & DSi v1.4.3x
     • Acekard 2i Driver Setup Guide

DS Compatibility

The following consoles are supported: DS, DS Lite, DSi, DSi XL & 3DS.

For DSi & DSi XL, the supported firmware versions are: 1.1, 1.2, 1.3, 1.4, 1.4.1,1.4.2 & 1.4.3.

For 3DS, the supported firmware version are : 1.1.0-1x, 2.0.0-2x & 2.1.0-4x.

Preparation (Checklist Before Installation)

Hardware

1 x DS / DS Lite / DSi / DSi XL / 3DS

• A DSi console with firmware lower than 1.4.3 (1.4.3E, 1.4.3J, 1.4.3U & 1.4.3A)
• If you don’t have a DSi with firmware lower than 1.4.3, you have to use a DS Lite console.

1 x Acekard 2i Card
1 x USB Reader
1 x Micro SD/SDHC Memory Card

 

Software (Please Click the Driver / Firmware Name for the Latest Download)

Firmware Fix For 3DS v2.1.0-3x & DSi v1.4.3x	ak2ifw_update_3ds21_DSi143
Driver / Kernel	AKAIO.1.8.8
Official Website	www.acekard.com

 

[ Back To Top ]

 

Format a Micro SD/SDHC Card

• Using Windows XP/Vista/7 Format Tool
• Using Panasonic Memory Card Format Program
• Using Mac Memory Card Format Tool

Using Windows XP/Vista/7 Format Tool

After inserting the Micro SD/SDHC into the card reader, go to My Computer.
    b)  Right click the driver representing the Micro SD/SDHC memory card.
    c)  Choose Format

 

d)  Click Start to format the memory card in FAT32

 

[ Back To Top ]

 

Using Panasonic Memory Card Format Software

Note:
If your memory cards have capacity bigger than 32GB, please download the SD/SDHC/SDXC Memory Cards Format Software.
If your memory cards have capacity equal or smaller than 32GB, please download the SD/SDHC Memory Cards Format Software.

Detailed guide is available from the SD Association here. [http://www.sdcard.org/consumers/formatter/] 

1. Insert SD/SDHC Memory Card into reader/writer.
2. Click on [Start], point to [All Programs] -> [Panasonic] -> [SD Formatter VX.X], and click on [SD Formatter VX.X].
   * “X.X” means the version number of SD Memory Card Formatting Software. 
   * If “User Account Control” window is displayed on the screen, please click on [Arrow].
3. The main window is displayed on the screen.
4. Select the target drive by drive list and check SD/SDHC Memory Card size.
5. Click on [Format].
6. After clicking on it, confirmation window is displayed on the screen. Here, if [OK] is clicked, this software executes the format operation. On the contrary, if [Cancel] is clicked, this software cancels the format operation and returns to the main window.
7. The following status window is displayed on the screen during the format operation.
   Note: [Cancel] on this window is available only if either “FULL (Erase ON)” or “FULL (Erase OFF)” is selected as format type option. If “QUICK” is selected as format type option, this button is not available.
8. After the format operation completion, click [OK] and remove the Memory Card from your PC.
9. Reinsert the memory card to the PC to start using the memory card.

 

[ Back To Top ]

 

Using Mac Memory Card Format Tool

1. Plug your memory card reader into a USB port on your Mac. Insert the Micro SD / MicroSDHC card into the memory card reader's MicroSD / MicroSDHC slot, and the MicroSD / MicroSDHC card will mount on your Mac desktop.
2. In an open Finder window, single-click "Applications" in the Side-Bar and scroll down to find the Utilities folder. Find Disk Utility in the Utilities folder and double-click the "Disk Utility" application to launch it.
3. In the opened Disk Utility application, single-click to select the MicroSD / MicroSDHC card in the left-hand Drives column. Then, single-click to select the "Erase" button in the top row of radio buttons. Select the format MS-DOS (FAT) to format the MicroSD / MicroSDHC card on the "Volume Format" pop-up button.  When you have finished selecting the formatting options, click "Erase."
4. A new dialogue box will pop up in "Disk Utility," asking if you are sure you wish to erase the MicroSD / MicroSDHC card. Caution: Erasing the MicroSD / MicroSDHC card will permanently erase any files. Make sure you have backed up any file you wish to keep. To continue with the formatting process, click "Erase."
5. Once the MicroSD / MicroSDHC card has been erased, it will mount on your Mac desktop just as any other removable drive.

 

[ Back To Top ]

 

Acekard 2i Firmware Fix For 3DS v2.1.0-4x & DSi v1.4.3

 

Kind reminder: 

When upgrading the r4i-sdhc card, it is not allowed to turn off power or pull out the card; otherwise the card will be damaged.

Prepare a DS Lite. If you do not have a DS Lite, try to get hold of another DSi or 3DS which does not block your Acekard 2i 3DS card.

 

 

Follow the steps below to carry out the update:

 

1. Plug your DS console to the wall to make sure that the DS console power supply will not be interrupted during the firmware upgrade process.
    
2. Download the official driver (AKAIO.1.8.7-2 )and firmware (ak2ifw_update_3ds21_DSi143).
    
3. Unzip the files downloaded (using Winrar) on your PC.
   1. Winrar can be downloaded from www.download.com by searching for Winrar at the Search.
   2. Unzip the files mentioned under the Software Preparation above, you will get:
      

      AKAIO.1.8.7-2	ak2ifw_update_3ds21_DSi143
      __aio akmenu4.nds LoaderChangelog.txt readme_AKAIO.txt readme_before_update.txt	ak2ifw_update_3ds21_DSi143.nds ak2ifw_update_3ds21_DSi143_onDSL.nds readme.txt

   • For DSi (XL)            :ak2ifw_update_3ds21_DSi143.nds
   • For DS Lite             :ak2ifw_update_3ds21_DSi143_onDSL.nds
      
4. If you have multiple Acekard 2i cards that you wish to update all in a row, run on the DS Lite console using ak2ifw_update_3ds21_DSi143_onDSL.nds
    
5. Now copy  all the eight files mentioned in step3 to the root folder of the Micro SD /SDHC memory card.
    
6. Plug in the Micro SD/SDHC to the Acekard 2i and insert the Acekard 2i to the DS Lite console.
    
7. Select the Micro SD/SDHC Card icon on the main operating system
   
    
8. Press button A to select the firmware file.
   • For DSi (XL)            :ak2ifw_update_3ds21_DSi143.nds
   • For DS Lite             :ak2ifw_update_3ds21_DSi143_onDSL.nds
      
9. When you see the following, please follow the instruction to eject the card and insert it again. Then press B to continue.
   
    
10. You will be prompted if you want to update the firmware as follows:
    
     
11. Press Start button on the DS to continue.
     
12. The following screen shows that the update is 55% done.
    
     
13. The following screen shows that the update has been completed. Congratulation! Restart your DS now.
    
     
14. The Acekard icon on the main menu has been changed to the following icon. The icon means you have upgraded the Acekard 2i Firmware successfully.
      

 

[ Back To Top ]

 

 

Acekard 2i Driver Setup Guide

1. Unzip the file downloaded (using Winrar) on your PC
   1. Winrar can be downloaded from www.download.com by searching for Winrar at the Search.
   2. Unzip the files mentioned under the Software Preparation above, you will get:
      

      AKAIO.1.8.8

      __aio akmenu4.nds LoaderChangelog.txt readme_AKAIO.txt readme_before_update.txt

2. Now copy the all the above four files to the root folder of the Micro SD/SDHC memory card.
    
3. Copy your own files, including music, movies, pictures and other data to the Micro SD/SDHC memory card.
    
4. Plug in the Micro SD/SDHC to the Acekard 2i. Insert the Acekard 2i with the microSD into the slot 1 of the DS console. Turn on the DS console.
    
5. You will see the WARNING – HEALTH AND SAFETY message. Please touch the touch screen or press button A to continue.
   
    
6. For DSi or DSi XL, you will the following icon with words ALEX RIDER STORMBREAKER THQ. Please touch the icon or press button A to continue.
   
    
7. Wait for the Acekard 2i to load.
   
    
8. You will see the Acekard 2i main menu. Touch the microSD Card icon or Press button A to continue.
   
    
9. Congratulation if you have come this far as you have successfully set up your iPlayer. There you go. Enjoy your DS with the multimedia functions.

 

[ Back To Top ]

 

View full post on R4 3DS Guides

]]> http://www.nintendodscard.com/r4-sdhc/acekard-2i-3ds-setup-guide-for-3ds-2-1-0-4-dsi-1-4-3/feed/ 0