View full post on R4 3DS & R4i Guides

a.     3DS with firmware version lower than 2.2.0-4E

b.    DSi / DSi XL with firmware version lower than 1.4.3E

c.     DS Lite / DS

Note: When upgrading the EZ Flash Vi card, it is not allowed to turn off power or pull out the card; otherwise the card will be damaged.

1.    Format your MicroSD card in FAT 32 first.

2.    Download the latest driver 3.0 OB7 and firmware EZ5F108A.

3.    Unzip the files downloaded on your PC, you will have files as below. 

4.  Select all the above five unzipped files and copy them onto the root of the MicroSD / SDHC memory card without any folder.

5.  Plug in the Micro SD / SDHC card to the EZ Flash Vi. Insert the EZ Flash Vi with the MicroSD / SDHC card into the slot 1 of the DS console. Turn on the DS console.

     a.   For DS & DS Lite, you will see the WARNING – HEALTH AND SAFETY message. Please touch the touch screen or press button A to continue.  

b.    For DSi or DSi XL, an icon with the message “Tak The Great Juju Challenge THQ” above it will appear. Please touch the icon or press button   A to continue.

6.  Wait for the EZ Flash Vi to load.

7.  When you see this menu, please select  " ez5firmwreUP_V108a.nds " and press A to continue. 

8. Then you will see the following message, please press Y to continue.

9. Next, the console will tell you the current firmware version of your EZ Flash Vi. If it's 106, or any version lower than 108, then please press A to continue.

10. Waiting EZ Flash Vi to upgrade. 

10. The following message means that you have upgraded the firmware successfully. Please restart the console. 

12. The icon on the main menu has been changed to the following icon. The icon means you have upgraded the EZ Flash Vi Firmware successfully. Please enjoy yourself.

Please refer here for the step-by-step setup guide for the EZFlash Vi / 5i card. 

View full post on R4 3DS & R4i Guides

Important:

Please note that not every Supercard DSTWO needs firmware fix!

Please follow the Supercard TWO Driver Setup Guide to setup the card first. 

If you get the error message like this :

An error has occurred. Press and hold the POWER Button to turn the system off. Plase refer to the Nintendo DSi Operations Manual for details. 

Please check the firmware version of your DSi or 3DS according to these two steps:

• Click SETTING (with the Tool Icon) on the main menu
• Check the right hand corner of the top screen which says VER 1.x.x

Then choose the correspondent firmware fix guide below to upgrade your Supercard DSTWO to be compatible with your DS console. 

Content List:

1. DS Compatibility
2. Preparation
   1. Hardware
   2. Software 
3. Installation
   1. Format a microSD /SDHC Memory Card
      • Using Windows XP/Vista/7 Format Tool
      • Using Panasonic Memory Card Format Program
      • Using Mac Memory Card Format Tool
   2. Firmware Fix
      • Supercard DSTWO Firmware fixes for 3DS 3.0.0-6 & DSi / DSi XL 1.4.3
   3. Supercard TWO Driver Setup Guide

DS Compatibility

The following consoles are supported: DS, DS Lite, DSi,  DSi XL  &  3DS.

For DSi & DSi XL, the supported firmware versions are: 1.1, 1.2, 1.3, 1.4, 1.4.1,1.4.2 & 1.4.3.

For 3DS, the supported firmware versions are: 1.0.0, 2.0.0-2, 2.1.0-3, 2.1.0-4, 3.0.0-5 & 3.0.0-6

Preparation (Checklist Before Installation)

Hardware

 1 x DS Lite / DSi/DSi XL/3DS
1 x Supercard TWO Card (Slot-1)
1 x USB Reader
1 x Micro SD/SDHC Memory Card

Software(Please Click the Driver / Firmware Name for the Latest Download)

[ Back To Top ]

Installation

Please upgrade the Supercard DSTWO firmware first before installing the driver if you want to use the Supercard DSTWO on the DSi with the latest compatible firmware.

• Format a microSD /SDHC Memory Card
  • Using Windows XP/Vista/7 Format Tool
  • Using Panasonic Memory Card Format Program
  • Using Mac Memory Card Format Tool
• Firmware Fix
  • Supercard DSTWO Firmware Fixes for 3DS 3.0.0-6 & DSi / DSi XL 1.4.3
• Supercard TWO Driver Setup Guide

Format a Micro SD/SDHC Card

• Using Windows XP/Vista/7 Format Tool
• Using Panasonic Memory Card Format Program
• Using Mac Memory Card Format Tool

Using Windows XP/Vista/7 Format Tool

After inserting the microSD into the card reader, go to My Computer.
    b)  Right click the driver representing the microSD memory card.
    c)  Choose Format

d)  Click Start to format the memory card in FAT32

[ Back To Top ]

Using Panasonic Memory Card Format Software

Note:
If your memory cards have capacity bigger than 32GB, please download the SD/SDHC/SDXC Memory Cards Format Software.
If your memory cards have capacity equal or smaller than 32GB, please download the SD/SDHC Memory Cards Format Software.

Detailed guide is available from the SD Association here. [http://www.sdcard.org/consumers/formatter/] 

1. Insert SD/SDHC Memory Card into reader/writer.
2. Click on [Start], point to [All Programs] -> [Panasonic] -> [SD Formatter VX.X], and click on [SD Formatter VX.X].
    “X.X” means the version number of SD Memory Card Formatting Software. 
   If “User Account Control” window is displayed on the screen, please click on [Arrow].
3. The main window is displayed on the screen.
4. Select the target drive by drive list and check SD/SDHC Memory Card size.
5. Click on [Format].
6. After clicking on it, confirmation window is displayed on the screen. Here, if [OK] is clicked, this software executes the format operation. On the contrary, if [Cancel] is clicked, this software cancels the format operation and returns to the main window.
7. The following status window is displayed on the screen during the format operation.
   Note: [Cancel] on this window is available only if either “FULL (Erase ON)” or “FULL (Erase OFF)” is selected as format type option. If “QUICK” is selected as format type option, this button is not available.
8. After the format operation completion, click [OK] and remove the Memory Card from your PC.
9. Reinsert the memory card to the PC to start using the memory card.

[ Back To Top ]

Using Mac Memory Card Format Tool

1. Plug your memory card reader into a USB port on your Mac. Insert the microSD / microSDHC card into the memory card reader's microSD / microSDHC slot, and the microSD / microSDHC card will mount on your Mac desktop.
2. In an open Finder window, single-click "Applications" in the Side-Bar and scroll down to find the Utilities folder. Find Disk Utility in the Utilities folder and double-click the "Disk Utility" application to launch it.
3. In the opened Disk Utility application, single-click to select the microSD / microSDHC card in the left-hand Drives column. Then, single-click to select the "Erase" button in the top row of radio buttons. Select the format MS-DOS (FAT) to format the microSD / microSDHC card on the "Volume Format" pop-up button.  When you have finished selecting the formatting options, click "Erase."
4. A new dialogue box will pop up in "Disk Utility," asking if you are sure you wish to erase the microSD / microSDHC card. Caution: Erasing the microSD / microSDHC card will permanently erase any files. Make sure you have backed up any file you wish to keep. To continue with the formatting process, click "Erase."
5. Once the microSD / microSDHC card has been erased, it will mount on your Mac desktop just as any other removable drive.

[ Back To Top ]

Supercard DSTWO Firmware fix for 3DS 3.0.0-6 & DSi / DSi XL 1.4.3

1. Find one of the following consoles to do the upgrade (Borrow from friends, classmates, colleagues or game store). 

•      DS or DS Lite console
•      DSi / DSi XL with firmware version lower than 1.4.3
•      3DS with firmware version lower than 2.2.0-4

2. Download the Firmware_v1.13 and  DSTWO_v1.11_1108  on your PC.

3. Unzip the two files and you will get five unzipped files. Make sure to put the following five unzipped files onto the root of the Micro SD/ SDHC card.

4. Turn on the DS or DSLite power, system will auto detect firmware 1.13.When you see the screen with words "Update system Beta 1.13 – 1.13",  please press the button A to start the upgrade. 

5. Then please wait for a moment. When it's done, you can see the words "upgrade successfully"!

6. DSTWO can work with 3DS with firmware version 3.0.0-6 and DSi / DSi XL 1.4.3 right now.

Note: Please make sure that the console is fully charged during the upgrade.

[ Back To Top ]

DSTWO Driver Setup Guide 

1. Unzip the file downloaded (using Winrar) on your PC
   1. Winrar can be downloaded from www.download.com by searching for Winrar at the Search.
   2. Unzip the file DSTWO_v1.11_1108, you will have ：
       
      _dstwo
      ds2boot.dat
       readme_eng.txt
       
2. Select all the above three unzipped files and copy them to the microSD memory card
     
3. Copy your own files, including music, movies, pictures and other data to the Micro SD/SDHC memory card.
    
4. Plug in the Micro SD/SDHC to the Supercard DSTWO. Insert the Supercard DSTWO with the microSD into the slot 1 of the DS console. Turn on the DS console.   
    
5. For DS & DS Lite, you will see the WARNING – HEALTH AND SAFETY. Please touch the touch screen or press button A to continue.
   
    
6. For DSi or DSi XL, you will see the following icon with the name Fish Tycoon Majesco Entertainment. Please touch the icon or press button A to continue.
   
    
7. Wait for the Supercard DSTWO to load.
    
8. Congratulation if you have come this far as you have successfully set up your Supercard DSTWO. There you go. Enjoy your DS with the truly multimedia functions.
   

[ Back To Top ]

View full post on R4 3DS & R4i Guides

• A NDSL console (borrow one from others if you don't have one)
• The R4i-sdhc 3DS flashcart with white screen problem
• One workable flashcart

    

   

   

 

   

   

View full post on R4 3DS & R4i Guides

Important

If your R4i SDHC 3DS / R4i Gold 3DS (r4ids.cn) / R4i Gold 3DS (r4i-gold.eu) / Acekard 2i / R4i Gold Plus / M3i Zero / DSTWO / DSONEi Mini supports 3DS 2.2.0 – 4 or 3.0.0-5, it can work directly on 3DS 3.0.0-6 with the latest driver installed.

1.    R4i SDHC 3DS

Please download and install the latest driver “R4i-3DS V1.51b English”.

The driver and the complete setup guide are available from the R4i SDHC 3DS Driver Setup.

2.   R4i Gold 3DS (r4ids.cn)

Please download and install the latest driver “Wood R4iGold V1.42”.

The driver and the complete setup guide are available from the R4i Gold 3DS Driver Setup Guide.

3.   Acekard 2i 3DS

Please download and install the latest driver “AKAIO.1.8.9”.

The driver and the complete setup guide are available from the Acekard 2i Driver Setup Guide.

4.   R4i Gold Plus

Please download and install the latest driver “v1.9”.

The driver and the complete setup guide are available from the R4i Gold Plus Driver Setup Guide.

5.    SuperCard DSTWO

Please download and install the latest driver “DSTWO_v1.11_1108”.

The driver and the complete setup guide are available from the Supercard TWO Driver Setup Guide.

6.    R4i Gold 3DS (r4i-gold.eu)

Please download and install the latest driver “R4i-3DS V1.57b English”.

The driver and the complete setup guide are available from the R4i Gold 3DS Driver Setup Guide.

7.  M3i Zero

Please download and install the latest driver “G6&M3DS-R_M74”.

The driver and the complete setup guide are available from the M3i Zero Driver Setup Guide.

8.  DSONEi Mini

Please download and install the latest driver “DSONEmini_Evolution_V1.0_eng_20110427”.

The driver and the complete setup guide are available from the Supercard DSONEi Mini Driver Setup Guide .

Meanwhile, the following cards are expected to be compatible with 3DS 3.0.0-5 once the manufacturers have released the firmware fix in the very near future:

1.    EZ Flash Vi

Please stay tuned for further updates. We will be sending out newsletters once there are further updates.

Besides, if you are not sure about the firmware version of your 3DS,here’s the simple guide for your reference:  

1. Touch the following icon on the lower screen.

2. Check the right hand corner of the top screen which says Ver. 1.1.0-0U.

1.1.0-0 is the firmware version number while the letter 'U' stand for the region of your console.
Here are the versions of the 3DS firmware for your reference:

A = Australia
E = Europe
J = Japan
U = United States

Up till now, there are five version for 3DS:1.0.0-0, 1.1.0, 2.0.0-2, 2.1.0-3, 2.1.0-4, 2.0.0-4, 3.0.0-5 & 3.0.0-6. 

View full post on R4 3DS & R4i Guides

You’ll find the Anti-Fake code after tear up the TRUTH INQUIRY sticker. You can input the code at check page to verify your R4i SDHC 3DS / R4i SDHC / R4 SDHC whether it is genuine or fake.

1. Get the entire TRUTH INQUIRY sticker up and you can see the code like this.

2. Please click here to the check page.
 

3. Please input the code in the correct way and click Check to view the result. As for this R4i SDHC 3DS, the correct way to put the code is 97700384537247416920.

• If your R4i SDHC 3DS / R4i SDHC / R4 SDHC is the genuine one, you will get the checking result like this:
  
   
• If your R4i SDHC 3DS / R4i SDHC / R4 SDHC is a clone or fake one, you will get the checking result like this:
  

Note:
 

View full post on R4 3DS & R4i Guides

•   NDS Lite console (borrow one from others if you don't have one) 
•   One working non-R4i Gold 3DS flashcard (called "A" -like R4, TT, AK2, M3 or DSTWO, etc)

View full post on R4 3DS & R4i Guides

R4i SDHC 3DS has been confirmed to be working for the V3.0.0-6 automatically as long as your R4i Gold 3DS card support 3DS v2.2.0-4.

For the upgrade and setup guide, please refer here for more details. 

View full post on R4 3DS & R4i Guides

• A NDSL console (borrow one from others if you don't have one)
• The R4i-sdhc 3DS flashcart with white screen problem
• One workable flashcart

    

   

   

 

   

   

View full post on R4 3DS & R4i Guides